----------------------------------------------------------------------
【JOOM Approved! Sold & Shipped by Trusted Japanese Sellers】
🔹 Operated by Verified Japanese Sellers – Approved by JOOM, our experienced Japanese sellers provide reliable service.
🔹 Direct Shipping from Japan – Carefully packed and promptly shipped straight from Japan.
🔹 Japanese-Standard Quality Control – Strict inspections ensure only high-quality products reach you.
🔹 About Included Manuals – If a manual is included, it will primarily be in Japanese. We recommend using image translation apps if needed.
----------------------------------------------------------------------
【Improved Design】1. A cold shoe is added to the top right corner of the cage, making it easier to mount accessories such as the Microphone 3468 and LED Video Light 3286. 2. Two 1/4"-20 screw holes spaced 18mm apart are added to the bottom, compatible with the SMALLRIG quick release plate for Arca 3154. A QD hole is added to the bottom, compatible with the QD quick release, shoulder strap and other accessories.
[For A7R V/A7 IV/A7S III/A1/A7R IV] The SMALLRIG Cage 3667B is designed for the A7R V, A7 IV, A7S III, A1, and A7R IV, protecting your camera while facilitating low-angle shots and providing a wide-angle view. It also features a range of accessory mounts. Note: The HDMI Cable Clamp 3000 is not compatible with the Alpha 1 or Alpha 7R IV, as it blocks the Sync Terminal interface when used with the Alpha 7R V.
[Multiple Mounting Points] The cage has multiple 1/4"-20 holes and 3/8"-16 locating holes for ARRI, allowing you to attach accessories such as the Top Handle 3765, Side Handle 2093, and Monitor Stand 2903B. There are two built-in cold shoe interfaces for attaching microphones, fill lights, and other equipment. The bottom QD holes are compatible with QD shoulder straps. Holes for attaching the Wrist Strap PAC2456 and Shoulder Strap PSC2428 are provided on both sides and the bottom of the cage.
[3-Point Lock] A locating pin has been added to the bottom of the cage, and the 1/4"-20 screw and M2.5 screw on the left side form a 3-point lock to stabilize the camera. The left locking slider is compatible with various models. The [A7 IV] side is suitable for the Alpha 7 IV and Alpha 7R V, and the [A7S III/A1] side is suitable for the Alpha 7S III / Alpha 1 / Alpha 7R IV.
【All-Round Protection】Built-in rubber gaskets prevent scratches. The camera's interface, dials, buttons, and battery access are unaffected when the cage is installed. The compartment has a built-in wrench design, which fits the camera's curves better, solving the problem of placing your little finger and enhancing your grip on the camera.
Built-in Quick Release Plate: The Arca's bottom quick release plate features additional 1/4"-20 holes spaced 18mm apart, making it compatible with DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro. It is compatible with the DJI RS 2 / RSC 2 stabilizer mounting board (riser plate) and the SmallRig Arca-Swiss compatible quick release plate-3154.
SMALLRIG Full Cage for Sony Alpha 7R V / Alpha 7 IV / Alpha 7S III / Alpha 1 / Alpha 7R IV - 3667B
The SmallRig Full Cage for Sony Alpha 7R V / Alpha 7 IV / Alpha 7S III / Alpha 1 / Alpha 7R IV 3667B is designed to provide accessory mounting and camera protection.
The camera is locked in place with one locating pin on the bottom, one 1/4"-20 screw, and one M2.5 screw on the left. The side lock adapter requires adjustment of the mounting direction to fit different camera types marked "A7". "IV" is for the Alpha 7 IV and Alpha 7R V, while "A7S III/A1" is for the Alpha 7S III / Alpha 1 / Alpha 7R IV.
The built-in all-around protective spacer prevents scratches on your camera. You can access the cage interface, dials, buttons, or doors. The compartment has a spindle spanner, fits the curve of the camera, and has enough room for your little finger to grip comfortably.
Note:
After fastening the 1/4"-20 screws at the bottom of the cage, remove the deflection-reducing pins from the staging holes at the compartment positions and fasten them in the corresponding positions.
To use the Sidelock Adapter, first remove the split ring on the left side of the camera.
The HDMI Cable Clamp 3000 is not compatible with the Alpha 1 and Alpha 7R IV cameras and will interfere with the Sync Terminal interface when used with the Alpha 7R V camera.
Compatibility:
For Sony Alpha 7R V
For Sony α7 IV
For Sony Alpha 7S III
For Sony α1
For Sony Alpha 7R IV
What's in the box:
1 x cage
Product dimensions: 146 x 107.6 x 64.5mm
Package dimensions: 165 x 155
