JTS Wireless Monitor System [] In-ear SIEM-2

------------------------------------------------------------------------------------------------------------------ 【Voltage Compatibility】 When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction. 【Plug Type】 Our products use Japanese plug types (A or B type). Please use a conversion adapter if necessary. 【Important Note on Transformers and Adapters】 A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product. 【Liability】 We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer. ------------------------------------------------------------------------------------------------------------------ Wireless in-ear monitor system using B band. The transmitter circuit uses a PLL system to achieve stable transmission and reception. It is a system with excellent cost performance. Can be used for up to 4 waves in the same area. ◎SIEM-2T wireless in-ear monitor system transmitter ■Transmission frequency: B band (select any one channel out of 16 channels in the 800Mhz band) ■Transmission output: 10mW ■Audio section input impedance: 20kΩ ■Input level: -20dBV ■Maximum output level: 0dBV ■LED display: Channel, AF level display ■Audio input connector: Combo jack x 2　XLR (balanced) or phone (unbalanced) ■Loop out connector: φ6.3mm x 2 ■Dimensions/mass: 210 x 180 x 40 mm, 450g ■Power supply: 12-18VDC, 600mA, center positive, inner diameter 2.1mm ◎SIEM-2R Wireless In-Ear Monitor System Receiver ■Reception frequency: B band (select any one channel out of 16 channels in the 800Mhz band) ■Transmission method: PLL synthesizer method ■LED display: Channel ■Control: Power ON/OFF, channel selection, volume control ■Frequency characteristics: 40 to 18000Hz ■Output connector: φ3.5mm stereo phone jack ■Dimensions/mass: 70 x 100 x 20 mm (excluding antenna and protrusions), approx. 90g (including battery) ■Power source: AA alkaline battery x 2 Wireless in-ear monitor system using B band. The transmitter circuit uses a PLL system to achieve stable transmission and reception. It is a system with excellent cost performance. Can be used for up to 4 waves in the same area. ■Frequency used 0 806.125Mhz 1 806.375Mhz 2 807.125Mhz 3 807.750Mhz 4 809.000Mhz 5 809.500Mhz 6 806.250Mhz 7 806.500Mhz 8 807.000Mhz 9 807.875Mhz A 808.500Mhz B 806.625Mhz C 806.875Mhz D 807.375Mhz E 808.625Mhz F 808.875Mhz *Output is monaural. *Each sound source input is monaural, so if two are input, a mixed sound will be output.