Product Specifications
Brand: SUPOR
Product Name: SUPOR Dual-Drink Children\'s Insulated Bottle
Capacity & Dimensions:
450mL (for younger children): 11.5cm diameter × 22cm height
600mL (for older children): 11.5cm diameter × 19cm height
Materials:
Bottle Body: 316L Stainless Steel (acid and alkali resistant, medical-grade quality)
Lid and Base: PP (Polypropylene)
Spout, Straw, and Sealing Rings: Silicone Rubber (liquid silicone)
Design Features:
Dual drinking modes: straw spout for slow sipping without tilting head; direct drinking mouth for free-flow large sips
Two-stage lid opening with pressure release: press and release to vent, long press 3 seconds for pre-release of pressure to prevent hot water splashes
Liquid silicone spout: flexible, chew-resistant, ergonomically angled to avoid neck strain
Multiple sealing system: silicone sealing ring, silicone straw plug, built-in pressure plate, safety lock buckle to prevent leaks
Plastic base for enhanced impact resistance
Lightweight with shoulder strap for easy carrying
Simple structure for thorough cleaning
Thermal Insulation Performance:
Tested with initial water temperature of 95.5°C, water temperature remains well above national standard requirements (40°C or 42°C depending on capacity) after 6 hours
Actual insulation performance depends on initial water temperature, ambient temperature, frequency of lid opening, and water volume inside the bottle
Usage Recommendations:
Fill with water below 50°C to avoid excessive pressure difference and risk of hot steam splashes causing burns
After pouring hot water, promptly tighten the lid and ensure the straw plug is properly closed
Minimize lid opening frequency and promptly re-tighten lid after use to maintain temperature stability
Regularly check the sealing ring condition and bottle body for dents or vacuum layer damage, as damage significantly reduces insulation
When new, open the lid and ventilate for several hours to dissipate any residual factory odors
Leakage and Durability:
Bottle withstands 70cm vertical drop test when full of water without leaking
Strong impacts or drops may cause sealing ring displacement, vacuum layer damage, lid cracking, or thread deformation leading to leaks
Plastic base enhances drop resistance
Cleaning and Sterilization:
Spout and straw: boil water sterilization (up to 5 minutes), silicone rubber, temperature range -20°C to 200°C
Sealing ring: steam or UV sterilization (up to 10 minutes)
Bottle body: 316L stainless steel, temperature range -10°C to 100°C, can be rinsed with boiling water (up to 2 minutes)
Lid and base: PP material
Avoid contact with pot bottom or walls during boiling sterilization
Safety Notes:
Avoid filling with liquids above 50°C to prevent burns; if necessary, be cautious when opening lid and keep away from face
Test temperature before feeding child
Frequent lid opening, low initial water temperature, or insufficient water volume may reduce insulation effectiveness
Testing and Certification:
316L stainless steel tested for acid and alkali resistance with no corrosion, blistering, or peeling
Leak-proof and pressure control verified by SUPOR laboratory tests
Additional Information:
Designed for children with ergonomic features and safety considerations
Supports easy, hygienic, and safe hydration throughout the day
Geld zurück bei Nichtlieferung
