This tactical light is a replica of the M600C-type Scout Light and can be mounted directly to a 20mm rail.
It can be mounted on a 20mm rail. It is compatible with the M4 series, HK416/417, SCAR, and other models, but please check the mounting base.
It comes standard with a "20mm rail-compatible dual remote switch"!
It can be operated in "constant on" or "momentary (on while pressed)" modes.
It is equipped with an XML-U2 high-intensity LED that produces approximately 600 lumens, providing dazzling brightness to illuminate the dark.
*The LED is very bright, so do not look directly at the light source.
It uses two CR123A batteries (batteries sold separately).
Note 1: Turn the "LED bulb side" on the front to open it, making sure the negative terminal is at the back.
Note 2: Batteries cannot be inserted into the open end of the tail cap.
Note 3: Remove the batteries when not in use to avoid power loss.
Notes:
1. 20mm rails, batteries, and other items not included in the set are sold separately.
2. Accessories, logos, colors, finishes, and engravings may vary depending on the production lot. Thank you for your understanding.
3. Batteries are sold separately. Please use new batteries that are within their expiration date. Worn or expired batteries may discharge and cause malfunctions.
4. If the light does not light or flashes, try tightening the LED bulb and tail cap and adjusting the insertion depth of the switch plug.
This tactical light is a replica of the SF M600C-type Scout Light and can be directly mounted to a 20mm rail. Made of aluminum alloy.
Equipped with a "20mm rail-compatible dual remote switch" as standard! Operate "constant on" and "momentary (on while pressed)" modes from your hand while holding the light.
Equipped with an approximately 600-lumen XML-U2 high-intensity LED, it provides dazzling brightness to illuminate the dark. Note: Due to the extremely high light output, do not look directly at the light source.
Compatible with 20mm rails. A 20mm mount with a knurled screw, which is easy to turn by hand, is included as standard. The switch can be directly attached to a 20mm rail. Note: Modifications and adjustments may be required. Thank you for your understanding.
Compatible batteries: CR123A/1634O x2 (batteries sold separately). Note: Turn the front "LED bulb side" to open it, making sure the negative terminal is facing inwards!!!
