Screws For Carpentry Joints Ssf 10.0X40Mm

Joint / connector screws with round flat head and TORX socket 10x40 mm Key parameters Model: SSF Size: 10x40 mm Maximum usable length: 8 mm Quantity: 50 pcs. Socket: TX-40 Material: Carbon steel with Impreg®+ protective coating which provides very good corrosion resistance and allows them to be used outdoors. The Impreg+ protective layer ensures a low risk of galvanic corrosion in combination with aluminum or stainless steel Original product from a renowned company SIMPSON Strong-Tie ® Product specifications screw diameter: 10 mm head diameter: 15 mm Diameter under head: 10.2 mm Head height: 3 mm Screw length: 40 mm Thread length: 32 mm Socket: TX-40 Packaging: 50 pcs. Benefits 1. Head with TORX socket It has a large contact surface between the screw and the tool, which reduces the risk of slipping and damage to the screw head, enables better transfer of rotational force, which is particularly important when working requiring high precision. 2. High corrosion resistance The special Impreg+ protective coating ensures very good corrosion resistance, which allows the product to be used outdoors and in contact with aluminum and stainless steel without the risk of galvanic corrosion. 3. Increased mechanical strength The widened screw shank under the head completely fills the hole. These construction screws are designed to withstand heavy loads, which has been confirmed by tests conducted in accordance with European standards. 4. Tip Prevents wood from splitting, while the grinder and serrated thread reduce screwing torque. 5. Service class 3 Characterized by a material moisture content corresponding to a temperature higher than 20°C and a relative humidity of the surrounding air exceeding 85%. Bit in the package Application and installation method Designed for attaching carpentry joints to wood. They are used together with connectors wherever it is necessary to shorten installation time and the connection does not require maximum loads. Intended for attaching carpentry joints to wood. Certificate ETA-21/0670 of 2021/12/09 This European Standard specifies requirements and test methods for materials, geometry, strength, stiffness and durability (i.e. corrosion protection) of fasteners used in load-bearing timber structures. The products we offer are characterized by the highest quality and can be safely used in construction. We make every effort to ensure that the products delivered to our contractors are safe and adapted to specific tasks. *The square and the tape measure are not included in the set