TOYOTA REAR CONTROL ARM BUSHING PULLER
Puller brand AMD TOOLS used for installing and removing the rear control arm bushing.
⬇️ APPLICATION:
TOYOTA ECHO NCP13 1999-2005
TOYOTA ECHO NCP12 1999-2005
TOYOTA ECHO NCP1# 1999-2005
TOYOTA ECHO SCP10 1999-2005
TOYOTA PLATZ SCP11 1999-2005
TOYOTA PLATZ NCP12 1999-2005
TOYOTA VITZ NCP1# 1999-2005
TOYOTA VITZ SCP1# 1999-2005
TOYOTA WILL VI NCP19 2000-2001
TOYOTA WILL CYPHA 2002-2005
TOYOTA YARIS SCP10 1999-2005
TOYOTA YARIS NCP1# 1999-2005
TOYOTA YARIS NLP10 1999-2005
TOYOTA IST NCP60/61 2002-2007
TOYOTA PASSO 2004-2010
GEELY MK 2006-2014
GEELY MK CROSS 2006-2014
⬇️FITS SLEEVE NUMBERS:
GEELY 1014001675; TOYOTA 48725-52010; TOYOTA 48725-52011
• BUSHING IS FOR ILLUSTRATIVE PRESENTATION - NOT INCLUDED IN THE KIT
• LUBRICATE THE THREAD AND WASHERS WITH GREASE
• Before removing the old bushing, cut off the collar of the old bushing and then remove the bushing using the largest and smallest adapters. To install the bushing, use two center adapters.
• Do not use electric wrenches, impact wrenches, or pneumatic wrenches.
• Before dismantling the bushing, it is necessary to remove the bushing protection.
• The bushing in the control arm is often very seized, so before using the puller, it is recommended to use various methods to loosen the bushings, e.g., using a burner, impact hammer, chemicals, etc.
• The new bushing must be correctly positioned in all directions.
• Make sure that the socket in the control arm is free of corrosion and dirt.
Geld zurück bei Nichtlieferung
