Boll Bumper Repair Kit 250g Resin and Glass Mat

RESIN REPAIR KIT GLASS MAT HARDENER

The resin has very good adhesion to metal, plastic surfaces, steel, glass, wood and concrete. It is resistant to temperatures up to 80 ° C, atmospheric factors, gasoline, greases, oils, diluted acids and alkalis.

After hardening, it has very high mechanical resistance, can be sanded and covered with any polyester putty.

Polyester resin - 242g + hardener 8g

Glass mat - 0.25m2

IMPORTANT TIPS AND ADVICE

Instructions for use

• Sand, clean and degrease the damaged surface.

• Cut the glass mat to the desired dimensions.

• Add hardener to the desired amount of resin (approx. 2-3%) and mix thoroughly in the cup provided.

• Apply the resin to the cleaned area within a maximum of 10 minutes (at 20°C).

• Then apply and press the cut mat with a brush or roller and apply the resin again.

• If necessary, apply another layer to the still sticky surface.