Tire Pressure Sensor No.53104671 Car Inner Tire Pressure Monitoring Sensor for Dodge Challenger 2010-2016 Metal Rubber Plastic

MANUAL RELEARN ｜ TPMS SCAN TOOL REQUIRED ｜ Install TPMS Sensors ｜ Adjust tire pressures to placard value ｜ Following procedure outlined by manufacturer, place the vehicle into Relearn Mode ｜ Using Scan Tool, Scan tires starting at LF ｜ Horn will honk to acknowledge sensor ID Code has been learned successfully ｜ Repeat for RF, RR, and LR ｜ After the last tire is scanned a double horn honk will confirm the process has completed ｜ Turn Ignition ON Engine OFF ｜ Drive vehicle to complete

OE Number:53104671 Vehicle Specific Fit: for Chrysler 300 2010-2016, for Chrysler Town & Country 2012-2016, for Dodge Challenger 2010-2016, for Dodge Charger 2010-2016, for Dodge Durango 2011-2015, for Dodge Grand Caravan 2011-2016, for Dodge Journey 2011-2016, for Dodge for Ram 1500 2010, for Dodge for Ram 2500 2010, for Fiat 500 2012-2016, for Fiat 500L 2014-2015, for Jeep Grand Cherokee 2011-2015, for Jeep Wrangler 2013-2017, for Ram 1500 2011-2013, for Ram 2500 2011-2013. How to use: Remove the old tire pressure sensor and install the new one;After installation, please park the car and turn off the engine for about 20 minutes, and keep the remote control key 5 meters away from car;Then start the vehicle and keep it running at a rate of 25 km/h above for 5--10 minutes to match the TPMS sensor;If the outdoor temperature is below 0, the matching time may be longer, that is normal. Please wait patiently for the matching.

Vehicle Specific Fit: for Chrysler 300 2010-2016 for Chrysler Town & Country 2012-2016 for Dodge Challenger 2010-2016 for Dodge Charger 2010-2016 for Dodge Durango 2011-2015 for Dodge Grand Caravan 2011-2016 for Dodge Journey 2011-2016 for Dodge for Ram 1500 2010 for Dodge for Ram 2500 2010 for Fiat 500 2012-2016 for Fiat 500L 2014-2015 for Jeep Grand Cherokee 2011-2015 for Jeep Wrangler 2013-2017 for Ram 1500 2011-2013 for Ram 2500 2011-2013

Voltage: 7.4