Daytona Motorcycle Throttle Sleeve for Z900RS etc. Flat Throttle Sleeve

• Throttle sleeve eliminates protrusions that get in the way when replacing grips.

• Eliminates the need to shave ribs, reducing work time for grip replacement

• Recommended grip length: Penetrating grip 123mm (2-4mm longer grip is recommended for non-penetrating grip)

• Reference compatible models: ZRX1200DAEG (09-16), ZRX1200R (01-08), ZRX1200S (01-04), NINJA1000 (11-19), Z1000/R EDITION(03-22), Z900/SE(18-23), Z900RS/CAFE(18-23), Z650RS(22-23), Zephyr X(97-08), NINJA250(13-22)

Throttle sleeve eliminates protrusions that get in the way when replacing grips. By replacing it at the same time as replacing it with a custom grip, there is no need to cut the ribs, reducing work time. Compatible grip is through grip 123mm. When installing a non-penetrating grip, we recommend a 2-4mm longer grip. Since this is a general-purpose product, please measure the genuine throttle sleeve and purchase one with a throttle wire winding diameter close to the genuine product. Reference compatible car models ZRX1200DAEG(09-16) ZRX1200R(01-08) ZRX1200S(01-04) NINJA1000(11-19) Z1000/R EDITION(03-22) Z900/SE(18-23) Z900RS/CAFE(18-23) Z650RS(22-23) Zephyr X(97-08) NINJA250(13-22)

*The dimensions listed are design dimensions. There may be slight differences due to individual manufacturing differences. *Cutting may be required depending on the car model and grip used. *Each part clearance and throttle opening are different from the genuine product. *The outer diameter of the grip attachment part is designed to be approximately 0.2 mm smaller than the genuine parts measured by each manufacturer. Therefore, depending on the car model, the genuine grip may no longer be usable. *We recommend applying a small amount of grease to the outer circumference of the handlebar in order to eliminate contact noise with the handlebar when idling or to improve throttle operation. *The grip does not stop rotating. When installing, please use grip bond (sold separately) (product number: 93129 / 96484) and wire ring to securely secure it. *The winding diameter may differ from the genuine product for reference compatible vehicle models. There are no problems in using it. * HOTGRIP heavy duty built-in 4SN (product number: 10154) can be installed. Some cutting may be required due to individual manufacturing differences.