Kegland Duotight 8mm/9.5mm Ball Lock Disconnect Kits (Gas/Liquid) Beer Brewing Accessary Bar Tool

Kegland Duotight 8mm/9.5mm Ball Lock Disconnect Kits (Gas/Liquid) Beer Brewing Accessary Bar ToolKL99596:KL20756x1+KL20763X1KL20756:duotight 8mm (5/16) x Ball Lock Disconnect - (Grey + Red Gas)KL20763duotight 9.5mm (3/8) x Ball Lock Disconnect - (Black + Yellow Liquid) ​The humble plastic ball lock disconnects have been around a long ​time and are used by thousands of home brewers around the world. ​Despite the extensive use they have seen little to no innovation for ​decades and KegLand wanted to change this.  As a result we have come out ​ with the new duotight ball lock disconnect.Some of the features include:duotight push in These ​ duotight ball lock disconnects already have the duotight fitting built ​into the ball lock disconnect. No need for additional threaded fittings. ​ Simply push the beer/gas line in and you are done!Compact ​The ​ worlds most compact ball lock disconnect every manufactured. This new ​compact form factor is great for tight spaces or fridges where you want ​to pack as many kegs in as possible. This is the only ball lock ​disconnect that allows standard ball lock kegs to be double stacked ​while still connected to beer and gas lines.Overmoulded Poppet ​The ​ overmoulded poppet design means you can couple and disconnect this ball ​ lock disconnect under extreme pressures of 150psi and will never have ​issues with the o-ring blowing out.Tool-less Disassembly ​Other ​ ball lock disconnects require a tool such as a flat head screw driver ​or spanner to take them apart for cleaning. The new caps on these allow ​for easy disassembly by hand, making these easier to break down for ​cleaning. It's literally never been easier to remove hop particles from ​your ball lock disconnects.Extreme Chemical Resistance ​No ​ cheap ABS plastic or nitrile seals. This ball lock disconnect is made ​from stainless spring and ball bearings, with an engineering polykeytone ​ resin body, EPDM and PP/EPDM overmoulded poppet.  This makes this ball ​lock disconnect resistant to extreme chemicals such as phosphoric and ​acetic acid, caustic soda, peroxide and many other acid or base ​chemicals which are commonly used in homebrewing.Toughness ​This ​ ball lock disconnect is more robust than any other plastic ball lock ​disconnect ever manufactured due to the use of new engineering plastics. ​ Don't be fooled by the small form factor - these bad boys are tough!High Flow ​The ​ internal design of these allows for faster flow meaning you can ​slightly quicker transfers when compared to other plastic ball lock ​disconnects.duotight Swivel Elbow Sold Separately If you are often pulling your beer and gas line sideways we recommend ​ the use of the duotight male to female elbow as this allows your gas to ​ swivel 360 degrees without making a kink in the beer/gas line. We have ​three different sizes available: ​KL18449 monotight - 6.35mm (¼') Female x 6.35mm (¼') Male Elbow ​KL18456 duotight - 8mm (5/16”) Female x 8mm (5/16”) Male Elbow ​KL18432 duotight - 9.5mm (3/8”) Female x 9.5mm (3/8”) Male ElbowKegLand now manufactures several other duotight ball lock disconnects ​ just like this one to suit several different beer/gas line sizes.  So ​for different beer and gas line use the following part numbers: ​KL24235 duotight 6.5mm (1/4") x Ball Lock Disconnect - (Black-Yellow/Liquid) ​KL24242 duotight 6.5mm (1/4") x Ball Lock Disconnect - (Grey-Red/Gas) ​KL20749 duotight 8mm (5/16") x Ball Lock Disconnect - (Black-Yellow/Liquid) ​KL20756 duotight 8mm (5/16") x Ball Lock Disconnect - (Grey-Red/Gas) ​KL20763 duotight 9.5mm (3/8") x Ball Lock Disconnect - (Black-Yellow/Liquid) ​KL20770 duotight 9.5mm (3/8") x Ball Lock Disconnect - (Grey-Red/Gas) KL99595:KL20749X1+KL20770X1KL20749:duotight 8mm (5/16) x Ball Lock Disconnect - (Black + Yellow Liquid)KL20770:duotight 9.5mm (3/8) x Ball Lock Disconnect - (Grey + Red Gas)